GT17 / TB25 Hyundai Turbocharger Bearing Housing 733952-0001 434578-0014

Garrett GT 20 / GT 17 / TB25 733952-0001 454054-0001 fit KIA / Hyundai turbocharger bearing housing

PRODUCT DETAILS

► Model : TB25 / GT 17 / GT20

► Fitted Turbocharger :

703389-0001 703389-0002 466501-0002 466501-0003

466501-0004 466501-0005 471037-0001 471037-0002

471189-0001 700273-0001 700273-0002 700917-0001

708337-0001 708337-0002 708337-0004 715843-0001

715924-0001 715924-0002 715924-0003 715924-0004

716938-0001 702213-0001 710060-0001 733952-0001

454054-0001 454054-0002 454059-0004

► SN NO. : 434578-0014 / 435889-0003 / 434578-0012

► Material : HT250 Gray Iron

► Application : Hyundai Mighty Truck / Chrorus BUS / H-100 Light Truck

Hyundai H1 BOX 2.5 CRDI / Starex 2.5 CRDi

KIA Sorento

► Package : anti-rust paper + plastic bag + PE foam + corrugated box

► Cooling mode : Water Cooling

PRODUCT SHOW

The bearing housing is what supports the entire system and routes the oil to the bearings. Usually made

of cast iron, the bearing housing can be air and oil cooled, or in many cases such as automotive use, it

contains water jackets to allow for watercooling.

The bearing housing also houses all of the other small parts critical to turbo operation, such as the gas

sealing system and oil control mechanisms. It also contains design features that insulate heat from the

turbine from migrating into the lube oil and cooking it after engine shut down.

Our NEW replacement bearing housings are cast in only the finest materials and are finished in OE

specification. Unless stated, all housings are a direct replacement for the original.

OUR ADVANTAGES

TIAN HISTORY

1995 - Tain turbo was established , covers an area of 4,000 square meters,owns

complete production lines for compressor wheel,compressor housing,and turbo shafts.

2005 - Tain applied advanced PLC-6 low-pressure casting equipment.

2010 - Tain set up foreign trade department,specialized in exporting turbochargers,cartridges and other turbo parts,like shafts,compressor wheels,repair kits,ect.

2010 – Tain cooperated with several big dealers and distributers from German ,and develop a variety of VNT turbocharger.

2012 – Tain entered the south America market,and won a good reputation for our good quality,complete product chain and sincere service.

2015 - Tain applied SCHENCK TB Sonio-core assembly balancing equipment,and other testing equipments to establish a final product quality assurance system.

2017 – Tain imported a 5-axis equipment – MAKINO L2. We have a production line of billet compressor wheels now.

turbocharger bearing

water cooled bearing housing

GT17 / TB25 Hyundai Turbocharger Bearing Housing 733952-0001 434578-0014 Images